The first tomato paste sales agent hot break in Asia

Do you know what company The first tomato paste sales agent hot break in Asia is? Which country exports tomato paste to the whole world?

 

What is hot break tomato paste?

In the production of hot break tomato paste, there are steps that we mention below:

• Tomato washing and sorting machine: There are different types of sorting machines, but the ones used to sort tomatoes and fruits such as pears, apples, and peaches. It is of the roller type (that is, it is a roller conveyor system), which should be the part that is related to fruits or tomatoes. It should be made of stainless steel or aluminum. Many points should be taken into account in the construction of the mentioned sorting machine. which can get the maximum efficiency from the system and prevent premature wear of the device.
• Shredder: There are different types of shredders. But for tomatoes, comb or disk type is used. which is a type of comb, while it is used for tomatoes. It can be used to chop relatively hard fruits such as apples, pears, and even beets.
• Manopump: After the chopping operation, chopped tomatoes (fruit) should be taken into the precooking machine for precooking. It should be heated there until the stage of tomato pre-cooking is done. This is used by a thickening pump called Monopump.
• Pre-heating tomatoes can be done in two ways: Hot Break Cold Break The difference between these two pre-cooking methods is only in the amount of heat given to tomatoes.
• As the name suggests, in this method tomatoes are pre-cooked at a temperature between 90 and 95 degrees. This has caused the complete loosening of the tomato texture. Therefore, during smoothing, some of the tissue of the fruit or tomato is separated with its juice (it is said that its viscosity is higher), which naturally will be the paste produced with a higher viscosity. Considering that tomatoes should be pre-cooked at a higher temperature of 90-95 degrees. Therefore, it should be noted that at this temperature we may get burned.
• Therefore, the burning agent should be removed or reduced from the system, which is done with a vacuum tank (made of stainless steel) in order to reduce the bubbles in the chopped tomatoes. It is of shell & tube type. Due to the fact that the converter is of shell & tube type, therefore, an all-steel centrifugal pump device is used to create the flow. Considering the above-mentioned cases, hot break pre-cooking devices are usually relatively more expensive than other types. is.

 

 

 

 

The first tomato paste salse agent

As the first distributor of quality tomato paste, we first pay attention to the type of tomato.

• Because to make the paste, the first and most important category is high-quality tomatoes, so the tomatoes must be ripe and juicy. Unfortunately, some profit-seeking people use whole tomatoes or tomatoes whose parts are green to prepare homemade pastes that they intend to sell. You should know that these green parts contain a poisonous substance called solanine, which can endanger people’s health, therefore, whether in the preparation of homemade or factory pastes, ripe tomatoes must be used.
• Tomato paste has many properties; One of its most important properties is the presence of an antioxidant called lycopene. This substance is found in most red fruits, but the main source of this substance is in tomatoes. As you know, heat is one of the most important steps in the preparation of tomato paste. At this stage, due to the heat, lycopene is released, which means that its antioxidant property increases.
• For this reason, it can be claimed that tomato paste is one of the products that, due to this process, It can play a significant role in people’s health. But most of the time, the heat level of the pastes that are prepared at home and under the supervision of non-specialists is more than needed; In this case, it can be said that tomato paste that is exposed to heat more than necessary, not only lacks antioxidants, but is no longer considered as nutrients. According to the mentioned conditions, if you are not sure about the stage of making homemade pastes, it is better to use factory pastes.

 

 

Tomato paste export in Asia

1. Asian tomato paste is exported all over the world. The reason is that the production of this product is suitable for brix. The following are the steps:
2. The production of paste with suitable Brix tomato paste begins with washing and cleaning the tomatoes.
3. After that, they crush the tomatoes with a special device. While crushing, they also give some heat to the tomatoes. so that the enzymes of the tomatoes are destroyed and the skin and seeds of the tomatoes are easily separated from their flesh
4. After crushing, the tomatoes are filtered with a filter device. until their water is completely separated. After that, pour the tomato juice into the thickener. And they concentrate it under pressure and vacuum.