Are you going to Buy tomato paste production machines in Asia? Contact our sales expert to get the price list of these devices.
Buy tomato paste production machines
To buy tomato paste production machines, you must first get acquainted with its types. Here are some examples of them and their applications:
Tomato Juice Tank
After separating the tomato juice (fruit), direct it to the tank for concentration. This tank is used to charge the concentrator. Because the tomato juice produced may not be used immediately. Therefore, it must be stored in a tank. Tomato water tanks are made of stainless steel. And to prevent water from settling (two-phase) and to prevent the floor, it is better to have a stirrer.
Cantinius condenser means that the tomato juice is continuously discharged to the charger and the paste is removed from the other part of the device. This type of thickener is called cantinium (continuous). The general structure of Cantinius condensers is as follows. The tomato juice is passed through a SHELL & TUBE heat exchanger by a relatively strong centrifugal pump and its temperature rises. And after passing the converter, it entered the body under a relative vacuum (bull). And because the pressure is low, it starts to boil. Cantinius condensers have different capacities depending on the number of bodies and converters (roshofer) and the dimensions and size of the converters under relative vacuum. Each body and heat exchanger is called an EFFECT. And the number of steps is also effective in the tonnage of the devices. In a cantinium condenser, two or three phases often supply energy to one phase (EFFECT) or direct vapor and the other phases from indirect vapor (vapor produced from the previous phase). As a result, Cantinius devices consume less steam than batch concentrators (at the same capacity).
The batch machine consists of one, two or three bodies (bulls) and a heat exchanger in the form of a shell located at the bottom (end 1.3). To prevent the paste from burning in the converter part, the device is equipped with a paddle stirring system in the mentioned part. Due to the need to concentrate at low temperatures, for higher quality in production, the system operates under vacuum to lower the boiling point. Therefore, batch concentrator, except for pumps and shell & tube converter, has other accessories of Caninius condenser. This device is used to concentrate tomato juice or dilute paste with high brix.
After production using this device, pasteurized paste and also this device was a shell & tube converter. Its pipes are located in four round trips. The heating system is operated by a converter tank that supplies heat by means of steam injection. Transfer the paste from the salting tank to the pasteurizer using a menu pump device. The salting tank also has a stirrer.
Baking tunnel (can pasteurizer) Can Pasteurizator
After packing the paste in the can, the cans should be sterilized. For this purpose, a cooking tunnel (passing autoclave) is used, which has different types. But the basis of work of all devices is the same. The differences were in the parts of the conveyor and the way the heat was converted. Conveyor systems include chain conveyor, gutter conveyor, wooden conveyor and…
Prices of tomato paste factory machines in Asia
As you know and read in the previous section, many and various machines are needed in tomato paste factories. Each of which has a different price depending on the brand and used or new. Also, buying a few of them will make you get a special discount. If you are in Asia, contact us for a price list.