The most important machines tomato paste factory original in Europe

Are you fully acquainted with The most important machines tomato paste factory original in Europe? What is the cheapest price of tomato paste?

The most important machines tomato paste factory

After the tomato juice is taken using mechanized devices in the previous steps. As we explained in the previous article. Completely and usefully, a few more steps remain to prepare an industrial and very high quality and delicious tomato paste. In this section, we want to explain all these steps to you in detail. And we will explain to you the most important machines of tomato paste factory and also how they work:

Tomato Juice Tank

After separating the tomato juice (fruit), direct it to the tank for concentration. This tank is used to charge the concentrator. Because the tomato juice produced may not be used immediately. Therefore, it must be stored in a tank. Tomato water tanks are made of stainless steel. And to prevent water from settling (two-phase) and to prevent foam, it is better to have a stirrer.

Cantinius condenser means that the tomato juice is continuously discharged to the charger and the paste is removed from the other part of the device. This type of thickener is called cantinium (continuous). The general structure of Cantinius condensers is as follows. The tomato juice is passed through a SHELL & TUBE heat exchanger by a relatively strong centrifugal pump and its temperature rises. And after passing the converter, it entered the body under a relative vacuum (bull). And because the pressure is low, it starts to boil. Cantinius condensers have different capacities depending on the number of bodies and converters (roshofer) and the dimensions and size of the converters under relative vacuum. Each body and heat exchanger is called an EFFECT. And the number of steps is also effective in the tonnage of the devices. In a cantinium condenser, two or three phases often supply energy to one phase (EFFECT) or direct vapor and the other phases from indirect vapor (vapor produced from the previous phase). As a result, Cantinius devices consume less steam than batch concentrators (at the same capacity).

Batch thickener

The batch machine consists of one, two or three bodies (bulls) and a heat exchanger in the form of a shell located at the bottom (end 1.3). To prevent the paste from burning in the converter part, the device is equipped with a paddle stirring system in the mentioned part. Due to the need to concentrate at low temperatures, for higher quality in production, the system operated under vacuum to lower the boiling point. Therefore, batch condenser, except for pumps and shell & tube converter, has other accessories of Caninius condenser. This device is used to concentrate tomato juice or dilute paste with high brix.

 Pasteurizer

After production using this device, pasteurized paste and also this device was a shell & tube converter. Its pipes are located in four round trips. The heating system is operated by a converter tank that supplies heat by means of steam injection. Transfer the paste from the salting tank to the pasteurizer using a menu pump device. The salting tank also has a stirrer.

 Baking tunnel (can pasteurizer) Can Pasteurizator

After packing the paste in the can, the cans should be sterilized. For this purpose, a cooking tunnel (passing autoclave) is used, which has different types. But the basis of work of all devices is the same. The differences were in the parts of the conveyor and the way the heat was converted. Conveyor systems include chain conveyor, gutter conveyor, wooden conveyor and…

The cheapest price of original tomato paste in Europe

As you saw in the previous section, if a supplier uses mechanized and advanced machines to produce tomato products. Can eventually produce an original product. Here are the suppliers who sell the cheapest original tomato paste in Europe. That you can have the best choice.